Kenwood KRF-V6400D Instruction Manual

Also see for KRF-V6400D: Service manual

Contents

Kenwood KRF-V6400D Instruction Manual Manual pdf 6 page image

6 KRF-V6400D/KRF-V5450DBefore useSpeaker setup(Detailed Setup)The detailed settings allow you to enjoy full performance of thereceiver according to the environment of your listening room.For creating the best listening environment, Kenwoodrecommends to perform the setup at the listening position.SETUPMULTI CONTROLO/peaker setup flowSpeaker setup flowSpeaker settings consist of 6 elements.1 Enter the Detailed Setup mode.[SETUP]Use [MULTI CONTROL ∞/5] to select an item to set.[SETUP]Elements Display SettingSpeaker Configuration "SP SETUP" Selects whether each speaker channelis used or, if used, its size.Speaker Level "TESTTONE" Selects the output level from eachspeaker.Speaker Distance "DISTANCE" Selects the distance between eachspeaker and the listening position.Crossover "CROSSOVER"Sets the lower limit of the bassfrequencies reproduced from thespeakers set to "NML" in the "SPSETUP". The frequencies below thefrequency set here are distributed toother speakers (those set to "LRG"and the subwoofer).2 Set each item.See the followings for each setup item.PlaybackVOLUME CONTROLINPUT SELECTOR AV AUXVOLUME /o1 Select a source.Use the Input source keys on the remote control unit toselect a source.Or use [INPUT SELECTOR] knob or [AV AUX] key on themain unit.Example: Display when HDMI 1 input source is selected2 Start playback from the selected source.3 Use [VOLUME %/fi] to adjust the volume.4 Enjoy various surround effects.You can enjoy a variety of listen modes. (See play using the listen mode> ¤.)The surround effects can be fine tuned according to theselected input source. (See the playing source> ·.)• The AV AUX input cannot be selected with the [INPUTSELECTOR] knob of this unit. This input should beselected using the [AV AUX] on this unit or the [AV AUX]key on the remote control unit.ContinuedInput source keyse t3 Ue ttHow to read this manualThe operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When thesame operation is also available on the main unit, the operating method is indicated in illustrations.The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwiseor counterclockwise.The knob on the main unitis pointed with an arrow toindicate that it can be turnedin either direction.The keys and controls used inthe operations described in eachsection are indicated with theirnames.The descriptions of the functionsavailable only on the remotecontrol unit are accompanied onlywith the illustration of the remotecontrol unit. The descriptions ofthe functions available only on themain unit are accompanied onlywith the illustration of the mainunit.The names of the operated keysor knobs are enclosed insidebrackets.This icon indicates supplementaryinformation, restrictions inoperation or tips on operation.When a key is used to selectan option, the list of options isshown in the form of a table.This icon indicates that thedescription continues on thenext page.• In this manual, KRF-V6400D is used for the illustrations of front panel and rear panel.• The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and maydiffer from the actual view or operation.This icon indicates that the function can be operated (orrecommended to operate) only with the unit displayed with the icon.: main unit : remote control unit