Kenwood KRF-V6400D Instruction Manual

Also see for KRF-V6400D: Service manual

Contents

Kenwood KRF-V6400D Instruction Manual Manual pdf 35 page image

English 35Listening to radio broadcastsPresetting radio stationsmanuallyThe RDS auto memory function assigns preset numbers to RDSstations starting from preset number "1". Therefore, be sureto execute the RDS auto memory function before using thefollowing operations to manually store AM stations and other FMstations, and RDS stations.See .MULTI CONTROLO/MEMORY1 Tune in the station you want to store.2 Press [MEMORY] while receiving the station.Proceed to step 3 within 20 seconds.If more than 20 seconds elapse, press [MEMORY] again.3 Use [MULTI CONTROL ∞/5] to select one of thestation presets (1 – 40).4 Press [MEMORY] to confirm the setting.Repeat steps 1 to 4 to store as many stations as necessary.If you store a station at a previously used preset, theprevious station will be replaced by the new one.Receiving preset stationsTUNER1 Press [TUNER] to select tuner as the source.2 Enter the number of the preset station you want toreceive (up to "40" preset numbers).Press the Numeric keys in the following order:For preset No.15: [+10] and [5]For preset No.20: [+10], [+10] and [0]Preset number• If you make a mistake entering a two digit number, press[+10] repeatedly to return to the original display and startagain.Numeric keys