Kenwood KRF-V7030D Instruction Manual

Also see for KRF-V4530D: Instruction manual Instruction manual Instruction manual Service manual Service manual

25OperationsAmbience effectsFront speaker (L, R)Subwoofer (SW)Center speakerDolby 3 StereoDolby 3 Stereo is available for systems that do not have surroundspeakers. When in the Dolby 3 Stereo mode, the surround informationis redirected to the front left and right speakers. This mode is designedfor use with Dolby Surround program sources, but can also improvesound field unity for programs that are not Dolby Surround encoded.Dialog positioning and sound image definition, however, may not be asaccurate when used with programs that are not Dolby Surroundencoded.Surround PlayThe DTS compatible models can reproduce a CD, DVD, or LD carryingthe DTS mark. (KRF-V7030D only)DOLBY DIGITAL can be used when playing DVD or LD software bearingthe mark and DOLBY DIGITAL (AC-3) format digital broadcasts(etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used whenplaying video, DVD, or LD software bearing the mark.• Turn ON related components.• Complete "Preparing for surround sound" (speaker settings). %• Use the INPUT SELECTOR to select the component you wish to playback with surround sound.• Use the INPUT MODE key to select the input mode (analog or digital)for the source you wish to play back. 0• Noise will be produced when a DTS source is played by selecting theanalog input.Preparations12Start playing the video software.Press the LISTEN MODE (LSTN.M) key to select thelistening mode.The listening mode settings are stored separately for each input. If theinput mode is set to digital auto ("AUTO SOUND" lights), the receiverselects the optimal listening mode automatically based on the type ofinput signal and the speaker settings.Each press of the LISTEN MODE (LSTN.M) key switches thesetting as listed below.The listening mode settings are different depending on the typeof input signal.When the DOLBY DIGITAL signal is input:(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)1DOLBY DIGITAL: DOLBY DIGITAL surround2PRO LOGIC: PRO LOGIC surround33 STEREO: 3-STEREO surround4STEREO: Normal stereo playbackContinued to next pageDVD 6-channel modeUsing a DVD player or the like equipped with six (5.1) output channelsand the receiver, you can enjoy multi-channel encoded DVD sourcematerial in all its splendor. Since the source signals are digital and eachchannel is input independently, the resulting sound quality, sense ofspaciousness, and dynamic range are superb.Front speaker (L, R)Subwoofer (LFE)*Center speakerSurround speakers (L, R)When you select DOLBY DIGAITALSTEREOFMAMMHzkHzPRO LOGIC3DOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDAUTOSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSWSP A RCLRSLSLFEAUTO SOUND DIGITALLSTN.MINPUTSELECTORINPUTSELECTORRC-R0610 RC-R0510INPUT SELECTORINPUT MODELISTEN MODELISTEN MODE* LFE = Low Frequency Effects. This channel delivers separate non-directional bass signals to the subwoofer for more dynamic deep basssound effects.The indication "LFE" appears in the display when a signal is being inputfor this channel.