Kenwood KRF-V7070D Instruction Manual

Also see for KRF-V7070D: Service manual Service manual

25 ENENGLISHPresetting radio stations manuallyThe RDS auto memory function assigns preset numbers to RDS stationsstarting from preset number “1”. Therefore, be sure to execute the RDSauto memory function before using the following operations to manuallystore AM stations and other FM stations, and RDS stations. See“Presetting RDS stations (RDS AUTO MEMORY)”. §MULTI CONTROLMEMORYTUNER1 Tune to the station you want to store.2 Press the MEMORY key while receiving the station.Blinks for 5 seconds Lights for 5 secondsLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYSTEREOTUNEDSurround EXMEMORYProceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).3 Use the MULTI CONTROL knob or Multi (%/ fi) keys toselect one of the station presets (1 – 40).4 Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.Receiving preset stationsTUNERNumeric keys1 Press the TUNER key to select tuner as the source.Listening to radio broadcasts2Enter the number of the preset station you want to receive(up to “40”).Press the numeric keys in the following order:For “15”, press 0,5For “20”, press 0,0,)• If you make a mistake entering a two digit number, press the +10key repeatedly to return to the original display and start again.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXReceiving preset stations in order (P.CALL)(P.Call @/#)TUNER1Press the TUNER key to select the tuner as the source.2Use the P.Call @/ #keys to select the desired station.• Each time you press the key, another preset station is received inorder.Pressing the P.Call # does the following:Pressing the P.Call @ does the following:Holding down the # or @ keys, lets you skip through thepresets, receiving each preset station at 0.5 second intervals.