Kenwood KRF-V7070D Instruction Manual

Also see for KRF-V7070D: Service manual Service manual

4 ENENGLISHPreparing the remote controlLoading the batteries1 Remove the cover. 2 Insert the batteries.3 Close the cover.• Insert two AA-size (R6) batteries as indicated by the polarity markings.OperationWhen the STANDBY indicator is lit, the power turns ON when you pressthe POWER RCVR key on the remote control. When the power comesON, press the key you want to operate.POWER RCVR6 m• When pressing more than one remote control key successively, pressthe keys securely by leaving an interval of 1 second or more betweenkeys.Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light from ahigh frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation to preventmalfunction.Before applying the powerUnpackingUnpack the unit carefully and make sure that all accessories arepresent.FM indoor antenna (1) AM loop antenna (1)Remote control unit (1) Batteries (R6/AA) (2)RC-R0823If any acccessories are missing, or if the unit is damaged or fails tooperate, notify your dealer immediately. If the unit was shipped to youdirectly, notify your shipper immediately. Kenwood recommends thatyou retain the original carton and packing materials in case you need tomove or ship the unit in the future.Keep this manual handy for future reference.Memory back up functionPlease note that the following items will be deleted from the unit'smemory if the power cord is disconnected from the AC outlet forapproximately 1 day.• Power mode.• Input selector settings.• Picture output.• Speaker ON/OFF.• Volume level.• BASS, TREBLE, INPUT level.• TONE ON/OFF.• LOUDNESS ON/OFF.• Dimmer level.• MD/TAPE settings.• Listen mode setting.• Speaker settings.• SW RE-MIX ON/OFF.• Distance setting.• Input mode setting.• Midnight mode setting.• PRO LOGIC II mode setting.• CS II mode setting.• Broadcast band.• Frequency setting.• Preset stations.• Tuning mode.• DSP mode.• ACTIVE EQ mode.• SPEAKER EQ mode.Remote sensorOperating range(Approx.)Infrared ray system