Rooms88How Do I Operate Devices?How Do I Operate Devices?General instructions for operating any device are given under “How Do IOperate Devices?” on page␣ 29. Some operations, however, are a little dif-ferent depending on the room you are in. The following section discusseshow devices may operate differently in different rooms.Operating Devices in Room ATo select the speakers for Room A, press the button for Speakers–A on thefront panel of the receiver.To set up PowerTouch to control Room A devices, follow the instructionsunder “How Do I Switch Control Modes?” on page 86.To control a second CD player from Room A, use , unless you areusing a Kenwood 200-Disc CD Changer (see below).Kenwood CD-3280M, CD-2280M, DPF-J9010, DPF-J9020 or DPF-J9030200-Disc CD Changers are specifically designed to work with the VR-4900/KRF-V9993D in a dual-room environment. Since they contain twoCD players, one can play in Room A while the other is playing simulta-neously in Room B. Use CD1 to control the changer for Room A and CD2to control the changer for Room B.Operating Devices in Room BIf you are using the receiver’s Speaker B outputs to power the speakers inRoom B, press the button for Speakers-B on the front panel of the re-ceiver to activate the speakers in Room B. The Listen Mode in Room Awill automatically switch to stereo when you turn Speakers B on.To set up PowerTouch to control Room B devices, follow the instructionsunder “How Do I Switch Control Modes?” on page 86.