Kenwood KRF-X9050D Instruction Manual

Also see for KRF-X9050D: Service manual Service manual

24OperationsNormal playbackAdjusting the soundAdjusting the toneYou can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode.1 Press the SOUND key repeatedly to select the tone mode to beadjusted.BASS: Select this to adjust the low frequency range.(Press the SOUND key once.)TREB: Select this to adjust the high frequency range.(Press the SOUND key twice.)Once-touch low frequency emphasis (bass boost)(Remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo modes.• Press the key once to select the maximum (+10dB) low frequencyemphasis setting.• This key does not function when the receiver is in the sound qualityor ambience effects adjustment mode.Switching back to the previous settingPress the BASS BOOST key again.• BASS BOOST key is not effective when THX is ON.FMAMMHzkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUND AUTOLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSWLSP A RSTEREOMuting the soundThe MUTE key lets you mute the sound of the speakers.Press the MUTE key.To cancelPress the MUTE key again so that the “MUTE” indicator goes off.• MUTE ON can also be deactivated by turning the volume controlknob.BlinksSOURCE DIRECT playback (for analog sources only)Use this function to pass the source material direct to the amplifier,bypassing any audio processing.Press the SOURCE DIRECT key.• When you press the LISTEN MODE, SOUND, or SET UP keys, orswitch to another input source, SOURCE DIRECT playback will becanceled.To cancelPress the SOURCE DIRECT key again.• If SOURCE DIRECT playback was activated when using a surroundmode, canceling SOURCE DIRECT playback will reactivate the previoussurround mode.Listening with headphones1 Press the SPEAKERS A and B key so that the speaker indicatorgoes off.• If you turn off all of the speakers when in surround mode, thesurround mode will be canceled as well, resulting in stereo play-back.LFECS RSLSTI.VOLBCLIPRDS EON PTYTP TA NEWSSWLSP A RMUTEPHONESSTEREOFMAMMHzkHzPRO LOGIC3DOWN MIXDIGITALMONITORDSPMEMOST.TUNEDAUTO SOUND AUTOS.DIRECT2 Use the MULTI CONTROL knob or keys to adjust the soundquality.• The bass and treble levels are adjustable from -10dB to +10dB in 2step increments.• The adjustment item is displayed for approximately 8 seconds.• BASS and TREB adjustment modes are not effective when THX isON.2 Connect the headphones to the PHONES jack.3 Use the VOLUME CONTROL knob (RECEIVER VOLUME keys)to adjust the volume.THX mode (Remote control only)You may use the THX key to switch ON or OFF the THX mode. The initialfactory setting for CD/DVD and DVD/6ch selectors is THX ON.Each press switches the mode as follows:1 “THX ON”2 “THX OFF”Make sure the SPEAKERSindicators are turned off.RLLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSP A• When THX is ON, “THX” indicator lights up.FMAMMHzkHzPRO LOGICDOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSLSP A RSTEREO3DIGITAL AUTOAUTO SOUNDSWSOUNDVOLUME CONTROLSOURCE DIRECTPHONES SPEAKERS A/BMULTI CONTROLRC-R0714 RC-R0715MULTICONTROLBASSBOOSTBASSBOOSTSOUNDTHXMUTE MUTETHXSOUNDRECEIVERVOLUMERECEIVER VOLUME