12 ENENGLISHCOAXIAL OPTICAL OPTICALVIDEO 3OPTICALMONITORCD/DVDDIGITAL IN DIGITAL OUTDVD/6CHVIDEO2Digital connectionsThe digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)format digital signals.If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully. 8COAXIALDIGITALOUT(AUDIO)DOLBY DIGITAL RFOUT (AUDIO)OPTICAL DIGITAL IN (AUDIO)LD playerPCM OUTSetting up the systemRF digital demodulator(DEM-9991D)(sold separately)MD recorderOpticalfiber cableComponent with DTS,Dolby Digital, or PCMCOAXIAL DIGITAL OUTConnect the video signal and analogaudio signals to the VIDEO 3 jacks.(See “Connecting video components”.)!To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)The RF digital demodulator (DEM-9991D) may not be on the market in certain areas countries.Component with DTS,Dolby Digital, or PCMCOAXIAL DIGITAL OUTConnect the video signal and analogaudio signals to the VIDEO 2 jacks.(See “Connecting video components”.)!Optical fiber cableCD or DVD playerOptical fiber cableOPTICAL DIGITAL OUT (AUDIO)OPTICAL DIGITAL OUT (AUDIO)COAXIAL DIGITAL OUT (AUDIO)
