24 ENENGLISHPreparing for playbackSome preparatory steps are needed before starting playback.Turning on the receiver1 Turn on the power to the related components.2 Turn on the power to this receiver by pressing the POWERON/OFF and ON/STANDBY key.Selecting the input modeIf you have selected a component connected to the CD/DVD, VIDEO 2,VIDEO 3 or DVD/6CH jacks, make sure that the input mode setting iscorrect for the type of audio signal to be used. 8Selecting MD/TAPESelect the source name corresponding to the component connectedto the MD/TAPE jacks. The initial factory setting is “TAPE”. Tochange the source to “MD”, follow the steps below:Hold down the MD/TAPE key for more than 2 seconds.• The source indication changes to “MD”.• To return to the original indication, repeat the above procedure.Selecting the speaker systemPress the SPEAKERS key to select the speaker system to beused.A ON : Sound from the speakers connected to the SPEAKERS Aterminals on the rear panel.B ON : Sound from the speakers connected to the SPEAKERS Bterminals on the rear panel. No sound will be heard fromthe subwoofer.A+B ON : Sound from both the speakers connected to theSPEAKERS A and B terminals on the rear panel.A+B OFF : No sound from the speakers. Use this setting whenlistening with headphones for stereo sound in all playbackmodes. The display segments are different depending onthe type of input signal.The indicator for the speakersyou want to use should be lit.• Selecting “6CH INPUT” by pressing the INPUT MODE key, whereby“DVD/6CH” is the input source will cause SPEAKERS A to be selectedautomatically.Normal playback Listening to a source component1Use the Input Selector and AV AUX key to select thesource you want to listen to.Selecting a source using each key.1 “DVD/6CH”2 “CD/DVD”3 “PHONO”4 “TUNER”5 “VIDEO 1”6 “VIDEO 2“7 “VIDEO 3”8 “MD/TAPE”9 “AV AUX”2Start playback from the selected source.3Use the VOLUME CONTROL knob or VOL +/–keys to adjustthe volume.INPUT MODEMD/TAPESPEAKERSON/STANDBYPOWER ON/OFFVOLUME CONTROLInput Selector AV AUXVOL /Input SelectorLSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzA B CLIPAUTO DETSWLFE
