2PHONESTHX DOLBY DIGITALDTS MPEGD.R.I.V.E. HDCD¤ INPUT SELECTOR ‹DOOROPEN/CLOSEVOLUME CONTROLDOWN UPAV - AUXS VIDEO VIDEO L - AUDIO - RA SPEAKERS B INPUTMODECD 2/TAPE 2MONITORLISTENMODE THXSET UPDISPLAYSOUND MULTICONTROLfi % P.CALL MEMORY AUTO BANDfi %DISCRETE 6.1 MATRIX 6.1 NEO : 6 PRO LOGIC CLIPINDICATORPOWERON/STANDBY-ON –OFFCD 2 / TAPE 2MONITORSURROUNDBACK 96K FSSTANDBYDTS-ES145 811 12 13 15 16171819202122242523101426237 961. STANDBY indicator2. POWER ON/STANDBY button3. POWER ON / OFF switch4. PHONES jack5. SPEAKERS A/B buttons6. INPUT MODE button7. CD 2/TAPE 2 MONITOR button8. LISTEN MODE button/DISPLAY button9. THX button10. SOUND button/SET UP button11. MULTI CONTROL (Up/Down) buttons12. P. CALL (Up/Down) buttons13. MEMORY button14. AUTO button15. BAND button16. AV AUX input jacks17. DOOR OPEN/CLOSE button18. VOLUME CONTROL knob19. INPUT SELECTOR buttons20. IndicatorsSURROUND BACK96kfsCD2/TAPE2 MONITORCLIP INDICATOR21. IndicatorsTHXDTSD. R. I. V. E.DOLBY DIGITALMPEGHDCD22. Display23. 2-way communication indicator24. Infrared remote sensor25. IndicatorsDTS-ES DISCRETE 6.1DTS-ES MATRIX 6.1NEO : 6PRO LOGIC26. Infrared remote transmitterButtons 5 to 15 are located behind the door.Buttonsbehind thedoorStandby modeWhile the standby indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This conditionis referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.What’s on the Front Panel of Your Kenwood Audio-Video Receiver?
