13Using PowerTouchHow Do I Adjust the Sound?5. Touch to return to the previous menu or touch any Quick Accessmenu button to access that menu.Operation on the receiver:1. Press the SOUND button in the door repeatedly until TONE OFF orON is displayed.2. Press the MULTI CONTROL (%/fi) button to display TONE ON (orOFF if desired so).3. When ON is selected above and the SOUND button is pressed again,the BASS setting menu appears.When OFF is selected above, the LOUDNESS setting menu appears.4. Adjust BASS level using the MULTI CONTROL (%/fi) button.5. Press the SOUND button.6. When the TREBLE setting menu appears, adjust the treble in the sameway as above. To exit from setting, press the SOUND button repeatedlyuntil “SOUND FIXED” is displayed.Adjusting Speaker LevelsYou can use the Sound menu to temporarily adjust the speaker levels ofyour center speaker, surround speakers, surround back speakers andsubwoofer. For example, if a particular movie has dialog that’s hard tounderstand, you can temporarily increase the center channel volume justfor that movie. For more information on adjusting speaker levels per-manently, see “Chapter Two: Setting Up PowerTouch” in the Connectionsand Setup Guide.1. Touch (Sound) on the Quick Access menu to open the Soundmenu:
