Kenwood KVT-920DVD Instruction Manual

Also see for KVT-920DVD: Service manual

475.1 Channels Surround Processor Control FunctionF IE HGDBA CDigital Effect Setting ScreenSelecting the Dynamic RangeSelect the dynamic range for Dolby Digitalsound.Each time you touch [ D-Range ], the dynamicrange switches as follows:" Standard "For more powerful sound at regular volumes." OFF "For regular sound.Selecting the Multi ChannelSelect the sound output speaker for Multichannel PCM sound.Each time you touch [ 2 ] or [ 3 ] to select thespeaker output as follows:" 3/2 "Centre, Front and Rear speaker" 2/2 "Front and Rear speaker" 3/0"Centre and Front speaker" 2/0 "Front speaker onlyYou cannot operate when “D-Prologic“ is set to“OFF”.DefeatReturns all of the DSP settings to the factorydefault.Touch [ Defeat ] it returns to the factory default.Returning to the Sound Effect MenuScreenTouch [ RTN ] to return to the sound effect menuscreen.NOTESelecting the Digital Input ModeEach time you touch [ Input Select ] to switch thedigital input mode as follows:" Digital "Optical digital input." Analog "Analog input.When playing DTS-encoded (CDs, DVDs),excessive noise may be exhibited from theanalog stereo outputs. To avoid possible damageto audio system, the consumer should takeproper pro-cautions when the analog stereooutputs of the DVD player is connected to anamplification system.Using the DOLBY PRO LOGICDolby Pro Logic is a technology developed byDolby Laboratories for the active decoding ofDolby Surround encoded source.Each time you touch [ D-Prologic ] to select DolbyPrologic on and off .Selecting the Acoustic ImageEach time you touch [ Bi Phantom ] to select theacoustic image on and off .You cannot operate when “D-Prologic“ is set to“OFF”.Turning the Centre Output On/OffEach time you touch [ Center SP ] to select centrespeaker output on and off.This select can be made when the 2 ch PCMsignal.Turning the Sub Woofer Output On/OffEach time you touch [ Sub Woofer ] to select subwoofer output on and off.NOTENOTECAUTIONCFDBAEGHI