49•You cannot operate when the “Center SP“ isset to "OFF" ( see P 47 ) multi-channels>.•You cannot operate when the “Multi channel“ isset to “2/2“ or “2/0“ ( see P 47 ).Returning to the Sound Effect MenuScreenTouch [ RTN ] to return to the sound effect menuscreen.Setting the Channel BalanceThis item allows you to adjust the output levelof each type of speaker using the built-in testsignal.The output level must be adjusted fromthe listening position.The factory setup is “0dB” for all types of speakers.Test SignalThis item allows you to output the built-in testsignal from the speakers. Use the test signalfor setting the balance between channels.Each time you touch [ Noise ] to switch the testsignal function on and off.Adjusting the Front Left SpeakerEach time you touch [ ] or [ ] to adjust thefront left output level.Adjusting the Front Right SpeakerEach time you touch [ ] or [ ] to adjust thefront right output level.Adjusting the Rear Left SpeakerEach time you touch [ ] or [ ] to adjust the rearleft output level.You cannot operate when the “Multi channel“ isset to “3/0“ or “2/0“ ( see P 47 ) with multi-channels>.Adjusting the Rear Right SpeakerEach time you touch [ ] or [ ] to adjust the rearright output level.You cannot operate when the “Multi channel“ isset to “3/0“ or “2/0“ ( see P 47 ) with multi-channels>.Adjusting the Centre SpeakerEach time you touch [ ] or [ ] to adjust thecentre output level.NOTENOTENOTEGA BD E FCABFEC GChannel Level Setting ScreenD
