Kenwood KVT-920DVD Instruction Manual

Also see for KVT-920DVD: Service manual

525.1 Channels Surround Processor Control FunctionARecalling the Kenwood Preset SoundEach time you touch [ 2 ] or [ 3 ] , the presetsound setting switches between the “FLAT“,“POPS“(TOP40), “ROCK“, “DANCE“, “VOCAL“and “CLASSIC“.Storing Your Sound SettingsTouch a [ 1 ] - [ 3 ] that you want to use for theequaliser curve for at least two seconds.Recalling Your Sound SettingsTouch a [ 1 ] - [ 3 ] for the desired equaliser curve.Returning to the Sound Effect MenuScreenTouch [ RTN ] to return to the sound effect menuscreen.Selecting the Adjust BandTouch the each box to select the band.Adjusting the Centre Frequency• Each time you touch [ ], the frequency isincreased.• Each time you touch [ ] , the frequency isdecreased.A 1 : 60Hz/ 80Hz/ 100Hz/ 120Hz/ 160Hz/ 200Hz/250HzA 2 : 315Hz/ 400Hz/ 500Hz/ 630Hz/ 800Hz/ 1kHzA 3 : 1.25kHz/ 1.6kHz/ 2kHz/ 2.5kHz/ 3.15kHz/4kHzA 4 : 5kHz/ 6.3kHz/ 8kHz/ 10kHz/ 12.5kHz/ 16kHzAdjusting the Quality FactorEach time you touch [ ] or [ ] to switch theBass quality factor as follows:1(0.25) / 2(0.5)/ 3(1.0) /4(2.0)Adjusting the Gain• Each time you touch [ ], the gain is increased.• Each time you touch [ ], the gain isdecreased.Setting the Speaker TypeUsing this function to set the diameter of thespeaker optimizes the sound quality to thespeaker diameter.Each time you touch [ 2 ] or [ 3 ] to switch thespeaker type as follows" STANDARD "Speaker with a general diameter" NARROW "Speaker with small diameter" WIDE "Woofer with a large diameter" MIDDLE "Woofer with a small diameterFCDBGEHA1BCDA2 A3 A4HE F GParametric Equaliser Screen