Kenwood KW-M875BW Quick Start Manual

Controlling Audio74When Speaker network is set to 3-way:■ [FREQ] (High Pass)High Pass Filter adjustment.■ [HPF FREQ], [LPF FREQ] (Band Pass)Band Pass Filter adjustment. (When MidRange Speaker is selected on the SpeakerSelect screen)■ [FREQ] (Low Pass)Low Pass Filter adjustment. (When Woofer isselected on the Speaker Select screen)■ [Slope]*1 *2Set a crossover slope.■ [Gain]Set the gain of each speaker.■ [Phase Inversion]Set the phase of tweeter, mid range, andwoofer output.Check [Phase Inversion] to shift the phase180 degrees.*1 Only when “LPF FREQ”/“HPF FREQ” (BandPass) is set to a mode other than “Through”in [Xover ].*2 Only when “FREQ” (Low Pass) is set to amode other than “Through” in [Xover ].NOTE• For how to switch to the 3-way speaker system,see 3-way speaker system setup (P.71).Connecting 3-way speakers with the 2-way modeselected can break the speakers.Controlling General Audio1 Press the [FNC] button.hh Popup menu appears.2 Touch [ ].hh HOME screen appears.3 Touch [ ].hh SETUP screen appears.4 Touch [Audio].hh Audio screen appears.5 Touch [Fader / Balance].6 Set each parameter as follows.■ [Fader], [Balance]Adjust the volume balance around thetouched area.[C] and [D] adjust the right and left volumebalance.[R] and [S] adjust the front and rear volumebalance.■ [Center]Clear the adjustment.NOTE• When the 3-way speaker system is selected,"Fader" adjustment is disabled.