Kenwood KW-M875BW Quick Start Manual

Other External Components47EnglishOther External ComponentsView CameraNOTE• To connect a camera, see Connecting thecamera (P.88).• To use a rear view camera, a REVERSE leadconnection is required. (P.85)• If [Rear Camera Interruption] is active thecamera screen is displayed when you shift thegear to the reverse (R) position.• The camera whose view was displayed last is keptand the same camera view will be displayed thenext time. If its assignment setting is changed, therear camera view is displayed.• Rear/front camera interruption screen is not keptas the camera screen which will be displayed thenext time.Ñ Display the camera screenYou can display the camera screen manuallyif “Camera” is registered to a popup menufunction key. (P.65)1 Press the [FNC] button.hh Popup menu appears.2 Touch [Camera].hh View camera screen appears.3 Adjust each item as follows.211 Camera Switching Keys* 1Touch to switch the view camera. It isnecessary to set “Camera AssignmentSettings” beforehand except “Rear”. See Toset up the camera assignment settings(P.48).2 Camera offTouch to exit the camera screen.* 1 When two or more cameras of rear, front,left, right, and 3rd are connected with thisunit.Ñ Camera Setup1 Press the [FNC] button.hh Popup menu appears.2 Touch [ ].hh HOME screen appears.3 Touch [ ].hh SETUP screen appears.4 Touch [Camera].hh Camera screen appears.5 Set each item as follows.■ Camera Assignment SettingsSet up the camera assignment. See To set upthe camera assignment settings (P.48).■ [Rear Camera Interruption][ON] (Default): Displays the picture from therear view camera when you shift the gearto the reverse (R) position.[OFF]: Select this when no camera isconnected.■ [Rear Camera Message]*1[Always display] (Default): Always displaysthe caution message on the rear camerainterruption screen.[Clear after 5 seconds]: Displays thecaution message for about 5 seconds onthe rear camera interruption screen.