3To prevent injury and/or fire, take the following precautions:• Ensure that the unit is securely installed. Otherwise it may fly out of place duringcollisions and other jolts.• When extending the ignition or ground cables, make sure to use automotive-gradecables or other cables with an area of 0.75mm2 (AWG18) or more to prevent wiredeterioration and damage to the wire coating.• To prevent short circuits, never put or leave any metallic objects (e.g., coins or metaltools) inside the unit.• If the unit starts to emit smoke or strange smells, turn off the power immediatelyand consult your Kenwood dealer• Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock.The liquid crystal fluid may be dangerous to your health or even fatal.If the liquid crystal fluid from the LCD contacts your body or clothing, wash it offwith soap immediately.To prevent damage to the machine, take the following precautions:• Make sure to ground the unit to a negative 12V DC power supply.• Do not open the covers of the unit.• Do not install the unit in a spot exposed to direct sunlight or excessive heat orhumidity. Also avoid places with too much dust or the possibility of water splashing.• Do not subject the monitor unit to excessive shock, as it is a piece of precisionequipment.• When replacing a fuse, only use a new one with the prescribed rating. Using a fusewith the wrong rating may cause your unit to malfunction.• To prevent short circuits when replacing a fuse, first disconnect the wiring harness.• Do not use any screws except for the ones provided. The use of improper screwsmight result in damage to the main unit.• You cannot view video pictures whilst the vehicle is moving. To enjoy video pictures,find a safe place to park and engage the parking brake.• If you experience problems during installation,consult your Kenwood dealer.• If the unit does not seem to be working right,try pressing the reset button first. If that doesnot solve the problem, consult your Kenwooddealer.NOTE2CAUTION2WARNING7.0-inch WIDE COLOR LCD MONITORReset buttonSafety Precautions