Kenwood LZ-701W Instruction Manual

Also see for LZ-701W: Instruction manual Service manual

Contents

English6InstallationAccessoriesExternal view......... Number of items........11........12........13External view......... Number of items........54........25(Ø4 x 12 mm)(Ø4 x 16 mm)Installation Procedure1. To prevent short circuits, remove the key from the ignition and disconnect the · terminal ofthe battery.2. Make the proper input and output cable connections for each unit.3. Connect the wiring harness cables in the following order: ground, ignition.4. Connect the wiring harness connector to the unit.5. Install the unit in your car.6. Reconnect the · terminal of the battery.7. Press the reset button. (See p. 3)• This product is intended for use with 12V DC negative ground power only. Do notconnect it to any other power supply• To prevent shorting, disconnect the battery cable from the negative terminal of thebattery during installation.• Be sure to firmly stabilise this product. Do not install it in a location which is notstable.• Follow the installation and wiring procedures described in this manual. Improperwiring or modified installation can not only result in malfunction or damage to theunit but may also result in an accident.• Do not install the unit in the following locations.•A location which interferes with the operation of the air bag system.•A location which is not made of plastic.\ Installing on leather, wood or cloth may damage the surface.•A location subject to direct sunlight, subject to the air from the air conditioner, orsubject to moisture or high temperature.\This may cause deformation of the monitor unit.2WARNING