Kenwood NEXEDGE NX-200 Instruction Manual

Also see for NEXEDGE NX-200: Brochure Instruction manual Instruction manual Specifications Instruction manual

Contents

24■ Optional SignalingYour dealer may also program several types of optionalsignaling for your transceiver channels.2-tone Signaling: 2-tone Signaling opens the squelch onlywhen your transceiver receives a call containing matching 2tones.DTMF Signaling: DTMF Signaling opens the squelch onlywhen the transceiver receives a call containing a matchingDTMF code.FleetSync Signaling: Refer to “Selcall (Selectivecalling )” on page 7.NXDN ID Signaling: NXDN ID is an optional signalingsystem available only for digital communications.voice operAted trAnSmiSSion (voX)VOX can be activated or deactivated by your dealer. VOXoperation allows you to transmit hands-free.Note: To operate VOX, you must use an optional KHS-, KHS-4,KHS--BH, or KHS--OH headset.■ VOX Gain Level1 Connect the headset to the transceiver.2 Press the key programmed as VOX.• The current VOX Gain level appears on the display.3 Press / to increase or decrease the VOX Gainlevel.• The VOX Gain can be adjusted from levels to 0.4 While adjusting the level, speak into the headsetmicrophone to test the sensitivity level. (Your voice isnot trasmitted during this test procedure.)• When sound is recognized, the LED lights orange.5 Press to save the setting.