Kenwood NEXEDGE NX-700 Instruction Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Specifications Specifications

Contents

3inSTAlling The TrAnSceiverFor passenger safety, install the transceiver securely using an optional mounting bracket and screwset so the transceiver will not break loose in the event of a collision.1 Mark the position of the holes in the dash by using the mounting bracket as atemplate. Drill the holes, then attach the mounting bracket using self-tappingscrews.• Be sure to mount the transceiver in a location where the controls are within easyreach of the user and where there is sufficient space at the rear of the transceiver forcable connections.2 Connect the antenna and power cable to the transceiver.3 Slide the transceiver into the mounting bracket and secure it usinghex-headed screws.4 Mount an optional microphone hanger in a location where it will be within easyreach of the user.• The optional microphone and microphone cable should be mounted in a locationwhere it will not interfere with the safe operation of the vehicle.When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same value.Never replace a fuse with a fuse that has a higher value.Hex-headedscrewsDC powercableMountingbracketAntennaconnectorPower inputconnectorFuseBlack (–) cableRed (+) cable2 V vehiclebatteryOptioinalmicrophoneIgnitionsense cableFlat washerSpring washerSelf-tapping screwExternalspeaker jack