Kenwood NEXEDGE NX-700 Instruction Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Specifications Specifications

Contents

7Selecting a Number from the List1 Select your desired zone and telephone group ID.2 Press the key programmed as Autodial.• The last called unit appears on the display.3 Press / to select your desired list number.4 Press the PTT switch to start the call.■ Receiving a Telephone CallWhen a call is received, press and hold the PTT switch to speak, and releaseit to receive.• Only one person can speak at a time.emergency cAllSIf your transceiver has been programmed with the Emergency function, you canmake emergency calls.1 Press and hold the key programmed as Emergency.• Ask your dealer for the length of time necessary to hold this key before thetransceiver enters Emergency mode.• When the transceiver enters Emergency mode, it will change to the Emergencychannel and begin transmitting based on how it is set up by your dealer.2 To exit Emergency mode, press and hold the Emergency key again.• If the Emergency mode completes a preset number of cycles, Emergency mode willautomatically end and the transceiver will return to the zone and channel that was inuse before Emergency mode was entered.Note:◆ Your dealer can set the transceiver to emit a tone when transmitting in Emergency mode.◆ Your dealer can set the transceiver to emit tones and received signals as normal, or mute thespeaker during Emergency operation.ScrAmblerPress the key programmed as Scrambler/ Encryption, or access the Menu{page 9}, to switch the transceiver to secure (encrypted) transmission.• Pressing the microphone PTT switch after the Scrambler function has been turned ONencrypts the transmitted signal.