Kenwood NEXEDGE NX-700 Instruction Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Specifications Specifications

Contents

53 Press / to select the station you want to call.• If Manual Dialing is enabled, you can enter the station ID by using themicrophone keypad, or by using / . When using / , cycle through the digitsto select a digit, then press to set the digit and move the cursor to the right.Repeat this process until the entire ID is entered.4 Press to enter Status mode.5 Press / to select the status you want to transmit.• If Manual Dialing is enabled, you can enter the status ID by using themicrophone keypad, or by using / (refer to step 3, above).6 Press the PTT switch or to initiate the call.• “<>” appears on the display when the status has beensuccessfully transmitted.■ ReceivingThe icon will flash and a calling ID or text message will appear when aStatus call is received. Press any key to return to normal operation.■ Reviewing Messages in the Stack Memory1 Press the key programmed as Stack, or press and hold the keyprogrammed as Selcall, Status, or Selcall + Status to enter Stack mode.• The last received message is displayed.2 Press / to select the desired message.• Message types are identified as follows:I: Caller ID, S: Status Message, M: Short Message• Press and hold for second to cycle the display information as follows:ID Name > Status/Short Message > CH/GID > Time Stamp3 Press to return to normal operation.• To delete the selected message, press or #. To confirm the deletion, pressor .• To delete all messages, press and hold or # for 1 second. To confirm thedeletion, press or .ShorT/long meSSAgeSReceived short messages are displayed the same as Status messages and arestored in the same stack memory.To send short messages, and to send and receive long messages, you mustconnect the transceiver to a PC. Ask your dealer for details.gpS reporTTo send your location data, you must first connect a GPS unit to the transceiver.GPS data can be manually transmitted by pressing the key programmed as Sendthe GPS data, or by accessing the Menu {page 9}. If set up by your dealer, GPSdata may be automatically transmitted at a preset time interval.