Kenwood NEXEDGE NX-720 Instruction Manual

Also see for NEXEDGE NX-720: Installation guide Technical details Service manual Service manual Instruction manual

Contents

iiCONTENTSGETTING STARTED...................................................................................... 1GETTING ACQUAINTED............................................................................... 3PROGRAMMABLE FUNCTIONS .................................................................. 5BASIC OPERATIONS.................................................................................... 6SCAN ............................................................................................................. 8FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ...................... 105-TONE SIGNALING ................................................................................... 12DTMF CALLS............................................................................................... 13ADVANCED OPERATIONS ........................................................................ 15BACKGROUND OPERATIONS .................................................................. 19PRECAUTIONSObserve the following precautions to prevent fire, personal injury, and transceiverdamage.• Do not attempt to configure the transceiver while driving; it is too dangerous.• Do not disassemble or modify the transceiver for any reason.• Do not expose the transceiver to long periods of direct sunlight, nor place it near heatingappliances.• If an abnormal odor or smoke is detected coming from the transceiver, switch thetransceiver power off immediately, and contact your KENWOOD dealer.• Use of the transceiver while you are driving may be against traffic laws. Please checkand observe the vehicle regulations in your area.• Do not use options not specified by KENWOOD.◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity andvoltage of the vehicle before installing the transceiver.◆ Use only the supplied DC power cable or a KENWOOD optional DC power cable.◆ Do not cut and/or remove the fuse holder on the DC power cable.For passenger safety, install the transceiver securely using the supplied mounting bracket andscrew set so the transceiver will not break loose in the event of a collision.