Kenwood NEXEDGE NX-720 Instruction Manual

Also see for NEXEDGE NX-720: Installation guide Technical details Service manual Service manual Instruction manual

Contents

3GETTING ACQUAINTEDFRONT AND REAR VIEWS(Power) switchPress to switch the transceiver ON or OFF./ keysPress to activate their programmable functions {page 5}./ keysPress to activate their programmable functions {page 5}.TX/RX IndicatorLights red while transmitting and green while receiving a signal. Flashes orange whenreceiving an optional signaling call.Microphone jackInsert the microphone plug into this jack.Status IndicatorLights blue during a specified mode, based on dealer programming./ S / A / / ■ keysPress to activate their programmable functions {page 5}.SpeakerInternal speaker.PTT switchPress this switch, then speak into the microphone to call a station.RF antenna connectorConnect the RF antenna to this connector.ACC connectorConnect the ACC to this connector, via the KCT-60.External speaker jackConnect an external speaker to this jack.GPS antenna connector Connect the KRA-40 GPS antenna to this connector.Power input connectorConnect the DC Power Cable to this connector.>: @ .=B 28;