Kenwood NX-5200 User Manual

Also see for NX-5000 series: Common Function Reference Function reference User guide User manual User guide

Alternatively, on full key models, you can enter a unit ID directly by pressing the keypad.● Press the [ ] key to enter the manual input mode. Refer to “CHARACTERENTRY” {p. 19} .Press the [ ] key to confirm the code after entering the code using the keypad.To delete the code entered, press the [ ] key to delete one digit, or press and holdthe [ ] key to delete all digits.3 Press and hold the PTT switch to make the call.● Speak into the transceiver as you would during a normal call.● The LCD display will return to the zone and channel screen after call ends.o Making Group Calls (NXDN Trunking)You can select a channel with the Group ID you wanted to call to make a call to thoseparties on a Trunking channel.● If the traffic channel is busy, a busy message appears and the busy tone sounds. Releasethe PTT switch and wait for the channel to become free. When the traffic channel becomesfree, a proceed tone sounds.1 Select the configured Group channel using the keys programmed as [ChannelUp]/ [Channel Down].10