Kenwood NX-5200 User Manual

Also see for NX-5000 series: Common Function Reference Function reference User guide User manual User guide

2 Press the [ ] or [ ] key to start pairing.Alternatively, you can pressed the key programmed as [Bluetooth Connect/Disconnect].● The LED indicator blinks in blue.● For Bluetooth devices that does not support Simple Secure Pairing, you need to entera Personal Identification Number (PIN) code. You need to operate the Bluetoothheadset to proceed with pairing.When pairing is complete, your transceiver will connect to the Bluetooth headset. Whenthe connection is established, you can perform hands-free call.● The “ ” indicator appears on the display.Note:● Once the headset has been paired, it can be used automatically with the transceiver thenext time the transceiver and headset are powered on. If the headset cannot be usedautomatically, connect manually using the My Device setting in the Bluetooth menu of thetransceiver.(Some headset models cannot be used automatically.)● Up to 10 Bluetooth devices can be registered to your transceiver.o Making hands-free callPress the PTT switch to activate the microphone of the Bluetoothheadset.Note:● The volume level can only be adjusted on the Bluetooth headset. The volumecontrol of the transceiver does not function. However, if the audio is set tooutput from the built-in speaker of the transceiver in the Bluetooth Speakersetting, the volume level is controlled by the transceiver.● The microphone sensitivity can be set using the External Mic Sense function..46