Kenwood NX-5200 User Manual

Also see for NX-5000 series: Common Function Reference Function reference User guide User manual User guide

2 Press and hold the PTT switch to make the call.● Speak into the transceiver as you would during a normal call.● The display will alternate between the called Group ID/ name and “Calling”.● The LCD display will return to the zone and channel screen after call ends.o Making Individual Calls (NXDN Trunking)You can make calls to specific persons.Operate in the same way as you would for Conventional channel. Refer to “MakingIndividual Calls (NXDN Conventional)” {p. 9} .RECEIVING1 Select the desired zone and channel using the Selector knob and the [ZoneUp]/ [Zone Down] or [Channel Up]/ [Channel Down] keys. (If the Scan functionhas been programmed, you can switch it on or off as desired.)2 When you hear the caller’s voice, readjust the volume as necessary.● If signaling has been programmed on the selected channel, you will hear a call only ifthe signal tone matches the tone set up on your transceiver.Note:● Signaling allows your transceiver to code your calls. This will prevent you from listeningto unwanted calls. It does not make calls private, it only prevents them from being heardby transceivers set with a different signaling code. Refer to “SIGNALING” {p. 38} fordetails.● A ringing tone will sound when receiving a call if the alert tone has been enabled in theAlert Tone setting. For details, consult your dealer.o Receiving Group Calls (P25)When you receive a group call on a Conventional channel and the received group IDmatches the ID set up on your transceiver, you can hear the caller’s voice.When you receive a group call on a Trunking channel, the transceiver automaticallyswitches to the traffic channel to receive the call.● Readjust the volume as necessary.11