1-32 (No.RA016)4.3.2 Key operation4.3.3 4, 6 or 8 reference level adjustments frequencyReceive AssistQT Deviation, DQT Deviation , LTR Deviation , DTMF Devi-ation , MSK DeviationRSSI Reference, Open Squelch, Low RSSI, High RSSI, TightSquelchTransmit Assist, High Transmit Power, Medium TransmitPower, Low Transmit Power, Balance, Maximum Deviation,P25 High Deviation, P25 H-CPM Deviation, NXDN High Devi-ation4.3.4 Adjustment item supplementKey FunctionPush Hold (1 second)[Selector] -[ ] Adjustment value up Continuation up[ ] Adjustment value down Continuation down[ ] Auto adjustment start -[ ] Wide5k/Wide4k/Narrow/P25/NXDN-[ Side1 ] -[ Side2 ] -[ Side3 ] -[ ] Shift to panel test mode -[ ] To enter 4, 6 or 8 refer-ence level adjustments-[ ] Writes the adjustmentvalue-[ ] Go to next adjustmentitemBack to last adjustmentitem (At the time of 4, 6 or8 point adjustment: Ad-justment point change)[AUX(Orange)]Output tone patternchange of balance ad-justment (A change ispossible only during bal-ance adjustment.)-[PTT] Transmit[0] to [9]and[#],[ ]-Tuning point Display RX (MHz) TX (MHz)700M RX/TALow700M RX/TALow763.100000 763.000000700M RX/TAHigh700M RX/TAHigh775.900000 776.000000800M RX/TALow800M RX/TALow851.100000 851.000000800M RX/TAHigh800M RX/TAHIgh869.900000 870.000000Tuning point Display RX (MHz) TX (MHz)700M RX/TAHigh700M RX/TAHigh775.900000 776.000000700M TX High 700M TX High 775.900000 805.993750800M TX High 800M TX High 869.900000 825.000000800M RX/TAHigh800M RX/TAHigh869.900000 870.000000Tuning point Display RX (MHz) TX (MHz)700M RX/TALow700M RX/TALow763.100000 763.000000700M RX/TACenter700M RX/TACenter769.100000 769.000000700M RX/TAHigh700M RX/TAHigh775.900000 776.000000800M RX/TALow800M RX/TALow851.100000 851.000000800M RX/TACenter800M RX/TACenter859.900000 860.000000800M RX/TAHigh800M RX/TAHigh869.900000 870.000000Tuning point Display RX (MHz) TX (MHz)700M RX/TALow700M RX/TALow763.100000 763.000000700M RX/TAHigh700M RX/TAHigh775.900000 776.000000700M TX Low 700M TX Low 763.100000 793.000000700M TX High 700M TX High 775.900000 805.993750800M TX Low 800M TX Low 851.100000 806.000000800M TX High 800M TX High 869.900000 825.000000800M RX/TALow800M RX/TALow851.100000 851.000000800M RX/TAHigh800M RX/TAHigh869.900000 870.000000Adjustment Item DescriptionReceive Assist The lock voltage of VCO (Receive) is ad-justed.This item must be adjusted before all ad-justment items for receiver section areadjusted.Transmit Assist The lock voltage of VCO (Transmit) is ad-justed.This item must be adjusted before all ad-justment items for transmitter section areadjusted.Frequency Frequency is adjusted under receivingcondition with SSG.The SSG needs 0.001ppm accuracy soplease use a standard oscillator if neces-sary.This item can be adjusted only in PC TestMode so that the adjustment value is notchanged easily.Ramp Offset Adjust this item to the optimal Ramp volt-age.
