1-46 (No.RA016)7.Maxi-mumDevia-tion*2[AnalogWide5K]1) Adj item:[Aw ADEV]Adjust:[****]2) Adj item:[Frequency:700MHz Band][RX/TA Low]→[RX/TA High]→[TX Low]→[TX High][Frequency:800MHz Band][TX Low]→[TX High]→[RX/TA Low]→[RX/TA High]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[Maximum Devia-tion (Analog Wide5k)]Deviation meterLPF: 15kHzHPF: OFF2) Adj item:[Frequency:700MHz Band][RX/TA Low]→[RX/TA High]→[TX Low]→[TX High][Frequency:800MHz Band][TX Low]→[TX High]→[RX/TA Low]→[RX/TA High]Press [Transmit]button.Press [Apply All]button to store theadjustment value.Devia-tionmeterOscil-lo-scopePanel ANT Panel [Paneltuningmode][],[][PCtestmode][←],[→]Write fixed value “496”for each adjustmentpoint. Transmit at eachadjustment point andcheck that the deviationis between 4150Hz and4250Hz.Deviation meterLPF: 15kHzHPF: OFF[Panel tuning mode]PTT: ON[PC test mode]PTT: Press [Transmit]button4150~4250Hz[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.[AnalogWide4K]*21) Adj item:[As ADEV]Adjust:[****]2) Adj item:[Frequency:700MHz Band][RX/TA Low]→[RX/TA High]→[TX Low]→[TX High][Frequency:800MHz Band][TX Low]→[TX High]→[RX/TA Low]→[RX/TA High]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[Maximum Devia-tion (Analog Wide4k)]Deviation meterLPF: 15kHzHPF: OFF2) Adj item:[Frequency:700MHz Band][RX/TA Low]→[RX/TA High]→[TX Low]→[TX High][Frequency:800MHz Band][TX Low]→[TX High]→[RX/TA Low]→[RX/TA High]Press [Transmit]button.Press [Apply All]button to store theadjustment value.Devia-tionmeterOscil-lo-scopePanel ANT Panel [Paneltuningmode][],[][PCtestmode][←],[→]Write fixed value “496”for each adjustmentpoint. Transmit at eachadjustment point andcheck that the deviationis between 3310Hz and3410Hz.Deviation meterLPF: 15kHzHPF: OFF[Panel tuning mode]PTT: ON[PC test mode]PTT: Press [Transmit]button3310~3410Hz[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.Item Condition Measurement Adjustment Specifica-tions/RemarksPanel tuningmodePC test mode Test-equip-mentUnit Ter-minalUnit Parts Method
