1-88 (No.RA017)[AnalogNarrow]1) Adj item:[An ADEV]Adjust:[****]2) Adj item:[Low1]→[Low3]→[Low5]→[Center1]→[Center3]→[Center5]→[High2]→[High4]→[High6]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[Maxmum Devia-tion (Analog Nar-row)]2) Adj item:[Low1]→[Low3]→[Low5]→[Center1]→[Center3]→[Center5]→[High2]→[High4]→[High6]Press [Transmit]button.Press [Apply All]button to store theadjustment value.Devia-tionmeterOscil-lo-scopePanel ANT Panel [Paneltuningmode][],[][PCtestmode][←],[→]Write fixed value foreach adjustment point.(The value is written be-low.) Transmit at eachadjustment point andcheck that the deviationis between 2050Hz and2150Hz.Deviation meterLPF: 15kHzHPF: OFF499[Panel tuning mode]PTT: ON[PC test mode]PTT: Press [Transmit]button2050~2150Hz[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.*2 : Refer to the “4.19.1 Necessary Deviation adjustment item for each signaling and mode” table.Regarding Maximum Deviation (Analog), it is common with the adjustment of all analog signalings.14. P25HighDevia-tion1) Adj item:[P1 PDEV]Adjust:[****]Deviation meterLPF: 3kHzHPF: OFF2) Adj item:[Low1]→[Low3]→[Low5]→[Center1]→[Center3]→[Center5]→[High2]→[High4]→[High6]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[P25 High Devia-tion]Deviation meterLPF: 3kHzHPF: OFF2) Adj item:[Low1]→[Low3]→[Low5]→[Center1]→[Center3]→[Center5]→[High2]→[High4]→[High6]Press [Transmit]button.Press [Apply All]button to store theadjustment value.Devia-tionmeterOscil-lo-scopePanel ANT Panel [Paneltuningmode][],[][PCtestmode][←],[→]Write fixed value foreach adjustment point.(The value is written be-low.) Transmit at eachadjustment point andcheck that the deviationis between 2771Hz and2883Hz.Deviation meterLPF: 3kHzHPF: OFF504[Panel tuning mode]PTT: ON[PC test mode]PTT: Press [Transmit]button2771~2883Hz[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.Item Condition Measurement Adjustment Specifica-tions/RemarksPanel tuningmodePC test mode Test-equip-mentUnit Ter-minalUnit Parts Method
