Kenwood NXR-800H Service Manual

NXR-800H204OPTIONAL ACCESSORIES / 可选附件 : KES-5 (EXTERNAL SPEAKER / 外部扬声器 )When Using an External Speaker1. Make sure the unit’s power is tuned off.2. When using the external speaker, remove the jumperlead from the connector, and attach the speaker cable.3. When not using the external speaker, replace the jumperlead and insert the connector into the speaker jack (pin 9and 12).使用外部扬声器时1. 确认单元电源已关闭。2. 使用外部扬声器时，从连接器上拆下跨接线，然后安装扬声器电缆。3. 不使用外部扬声器时，重新安装跨接线，将连接器插入扬声器插孔 ( 针脚 9 和 12)。SpecificationsMaximum input power ................................................... 40WImpedance ......................................................................... 4ΩDimensions (W x H x D) projection not included.............................................................129 x 129 x 77 mmWeight ............................................................................820g规格最大输入功率...................................... 40W阻抗.............................................. 4Ω尺寸（宽 × 高 × 深，不包括凸起部分）................................... 129×129×77 mm重量............................................. 820gTEST/SPKRRX-INCONTROL I/OFRAMENXR-800H131126Jumper lead跨接线KES-5Crimp terminal压接式端子(E23-0613-05)Connector连接器Speaker cable扬声器电缆Black/White lead黑色/白色导线Black lead黑色导线