Kenwood PKT-23 Instruction Manual

Also see for PKT-23: Specifications Brochure & specs Easy programming instructions Instruction manual Easy programming instructions

Contents

6InsTaLLInG The BeLT CLIPIf necessary, attach the belt clip using the twosupplied M3 x 6 mm screws (with washers).Note: If the belt clip is not installed, its mountinglocation may get hot during continuous transmissionor when left sitting in a hot environment.Do not use glue which is designed to prevent screw loosening wheninstalling the belt clip, as it may cause damage to the transceiver.Acrylic ester, which is contained in these glues, may crack thetransceiver’s back panel.ConneCTInG an earPhone/ mICroPhoneConnect an earphone/ microphone to thephone jack on the top of the transceiver.Note: To keep the transceiver water resistant,the phone jack cover must remain closed.Phonejack cover3.5 mmplug