12ChanneL seTuP moDeThis transceiver allows you to reprogram each of the channelswith different frequencies and QT (Quiet Talk)/ DQT (DigitalQuiet Talk) settings. The table below lists the default channelsettings.ChannelNumberTableNumber Frequency QT/DQT Setting1 2 464.5500 MHz 67.0 Hz2 8 467.9250 MHz 67.0 Hz3 9 461.0375 MHz 67.0 Hz4 10 461.0625 MHz 67.0 HzoPeraTInG FreQuenCY anD QT/ DQT seTTInGTo change the operating frequency of a channel:1 With the transceiver power OFF, press and hold the PTTswitch and Up key while turning the transceiver power ON.• Continue to hold the Power switch, PTT switch, and Upkey until the LED indicator lights yellow and the transceiverannounces “Self”.2 Release the Power switch, PTT switch and Up key.• The transceiver announces “Channel Number”.3 Press the Up/Down key to select your desired channel, thenpress the PTT switch to confirm the selected channel.• Upon releasing the PTT switch, a beep will sound and thetransceiver announces “Table Zero”.4 Press the Up/Down key to increment/ decrement the Tablenumber, to select the new channel frequency.• Press and hold the Up/Down key to continuously increment/decrement the number.• Table numbers and their corresponding operating frequenciesare provided in the tables on pages 13 and 14.• A voice announcement will inform you of the selected Table number.