Kenwood R-K711 Instruction Manual

Also see for K-711: Mode d'emploi

Contents

Kenwood R-K711 Instruction Manual Manual pdf 44 page image

44 R-K711Playback from a Digital Audio PlayerYou can connect a Kenwood digital audio player (referred to hereafter simply as “digital audio player”) tothe system and use it to play tracks.D.AUDIOConnect the digital audio player to the [D.AUDIO IN]terminal on the rear panel of the main unit.11Use this procedure to connect a digital audio player to the system and use itto play tracks.When connecting the digital audio player, always turn this system and the digital audioplayer off beforehand.Refer also to the instruction manual for the digital audio player to be connected.Connecting the digital audio player using the dedicated cable allows you to operate thedigital audio player using the main unit or the remote control.zzzCompatible Kenwood digital audio playersHDD audio player Memory audio playerHD20GA7 M1GC7Turn on the digital audio player.22Press the [D.AUDIOE] key to begin playback.Simply pressing the [D.AUDIOE] key turns on the system and beginsplayback.If the digital audio player is not connected using the dedicated cable, use thecontrols on the connected digital audio player.zz33If you use the dedicated cable for the connection, the volume and sound qualitysettings on the digital audio player are disabled.When you have finished using the digital audio player, disconnect the player’sconnection cable from the [D.AUDIO IN] terminal.zz