Kenwood R-K711 Instruction Manual

Also see for K-711: Mode d'emploi

Contents

Kenwood R-K711 Instruction Manual Manual pdf 73 page image

73EnglishTroubleshootingApparent faults or malfunctions may be easily resolved. Before calling for service, check the tablebelow for symptoms that match yours.Symptoms Solution Ref. pageAmplifier/SpeakersThere is no sound. Check that the system is connected properly, asdescribed in “Connecting the System”.Increase the volume.Cancel the MUTE setting.If there are headphones plugged into the main unit,unplug them.zzzz10 - 13202013The [STANDBY/TIMER]indicator is flashing redand there is no sound.One of the speaker cords is short-circuited. Unplug thepower cord and then reconnect the speaker cord.There may be an internal problem. Turn off the powerto the main unit, unplug the power cord and requestrepairs.zz—There is no soundfrom the headphones.Check that the headphone plug is inserted correctly.Increase the volume.Cancel the MUTE setting.zzz132020There is no sound from“D-IN”.Check that the system is connected properly, asdescribed in “Connecting the System”.Check whether “PCM” is selected as the digital audiooutput setting on the connected component.zz13There is no sound fromone of the speakers.Check that the system is connected properly, asdescribed in “Connecting the System”.Adjust the balance.zz1060There is a booming soundwhen I select PHONO asthe input source.Insert the audio cord plugs securely into the [PHONO IN]jacks.Connect the signal earth wire to the [M] terminal.zz1212The clock display isflashing.Set the time as described in “Setting the Time”.z 69The timer does notwork.Set the time as described in “Setting the Time”.Set a start time and end time for the program timer.zz6963I can’t get receptionfrom a radio station.Connect the antennas.Select the broadcast band (AM or FM).Tune the radio to the frequency of the desired station.zzz103636There is interference(noise).Install an outdoor antenna away from the road.Turn off any electrical appliances that may be causinginterference.Move the system away from the TV.zzz—I have used Auto Memoryand pressed the [P.CALL]key, but I still can’t getradio reception.Run Auto Memory again.Manually preset stations with frequencies that you canreceive.zz3839TunerSymptoms Solution Ref. page