Kenwood SIRIUS KTC-H2A1 Instruction Manual

Also see for KTC-H2A1 - Here2Anywhere Sirius Radio: Instruction manual Installation guide Instruction manual

Contents

Clock SetupHere 2 Anywhere has an automatic clock that receives itstime signal as part of the SIRIUS satellite stream.To set the clock, you need to tell Here 2 Anywhere whattime zone you live in and if your local area observesDaylight Savings Time.1. While in the Setup Mode, press the left or right arrowbuttons until the Auto Clock Setup screen appears(top, right).2. Press the up or down button once and the Time ZoneSetup screen appears (middle, right).3. Press the up or down arrow buttons until your timezone is highlighted, then press the SELECT button.• The screen will change to the Daylight Savings screen (bottom, right).3. If your local area observes Daylight Savings Time, press the SELECT button so an “X” appears in the boxon the display’s fourth line; if your local area doesnot observe Daylight Savings Time, press the SELECTbutton so that the box is empty.Note: If you drive into another time zone (or into anarea with a different Daylight Savings Time status thanyour local area) you will have to re-set the clock.2524 Here 2 Anywhere Instruction Manual (ver. 2)Time Zone Setup ScreenDaylight Savings ScreenPress the DISPLAY button to cycle the display between the two modes.Adjusting the display brightnessHold the DISPLAY button down for over 1 second toenter the Display Brightness mode (right):1. Use the up & down arrow buttons to select thedesired brightness level (high/medium/low)2. Press the SELECT button to save your selection• Press the DISPLAY button to exit this modeSetup ModeThe Setup Mode lets you access and set up the following features: SID (SIRIUS ID Number), Auto ClockSetup, Alarm Clock Setup, Channel Skip/Lock, Lock Code Setup, Auto Shutoff Setup, Startup Mode, OutputLevel, Text Flow Type, Audible Alert, and Antenna Signal.To enter the Setup Mode, hold the POWER button on the front panel for at least 1 second. Use the left &right arrow buttons to move to the setup feature you want, and press the SELECT button to select thefeature. To exit the Setup Mode and return to the previ-ous operation mode, press the POWER button at anytime while the Setup Mode is active.SIDWhen you first enter the Setup Mode, the unit’s unique12-digit SIRIUS ID Number will be displayed (right):Here 2 Anywhere Instruction Manual (ver. 2)Display Brightness ScreenSIRIUS ID ScreenAuto Clock Setup Screen