Kenwood SIRIUS KTC-H2A1 Instruction Manual

Also see for KTC-H2A1 - Here2Anywhere Sirius Radio: Instruction manual Installation guide Instruction manual

Contents

7. Use the up and down arrow buttons to move through the streams until the one you want is highlighted.8. Press the SELECT button to save your setting. The Alarm Setup screen will reappear.Press the POWER button on the front panel to exit the Setup Mode.Using the alarmAt the specified time (see above) , Here 2 Anywhere will automatically turn itself on to the selected stream.• The stream number will flash positive and negative.Note: To hearHere 2 Anywhere, make sure that the audio system it is connected to is turned on.To enter the “Snooze” mode, press any button once.• The Snooze cycle is 10 minutes long.• You can repeat the Snooze cycle as many times as you want.To shut the alarm off, press any button twice. (This shuts Here 2 Anywhere completely off.)To listen to Here 2 Anywhere after you’ve shut the alarm off, press the POWER button.Important: If you remove Here 2 Anywhere from the dock and replace it in the same (or another) dock, you mustpower it up at least once for it to re-acquire the clock stream data before the alarm function will work. (You don’thave to re-set the alarm.) Once you have powered Here2 Anywhere up once you can turn it off and the alarm willfunction properly. As long as Here 2 Anywhere remains in the cradle after being powered-up it will retain the clockstream and the alarm will function properly.Auto ShutoffYou can set Here 2 Anywhere to automatically shut off if it is accidentally left on (if a button isn’t pressed forTimer FunctionsHere 2 Anywhere has three Timer functions. The Alarm turns Here 2 Anywhere on at a specified time and to aspecified stream, Auto Shut-Off automatically turns it off at a specified time, and the Sleep Timer lets youlisten to Here 2 Anywhere for a specified period of timebefore it automatically shuts off.Setting the Alarm1. While in the Setup Mode, press the left or right arrowbutton until the Alarm Setup screen appears (top right).2. Press either the up or down button. The Step 1 — SetAlarm Time screen appears (middle, right).3. Use the up and down arrow buttons to set the houryou want Here 2 Anywhere to turn on. (The alarm willautomatically switch from AM to PM.)4. When the display shows the correct hour, press theright arrow button to highlight the minutes. Use theup and down arrow buttons to set the minute youwant Here 2 Anywhere to turn on.5. When the display shows the correct hour and minute,press the SELECT button to turn the alarm on.6. Press the MEM button to save your settings. TheStep 2—Set Channel screen will appear (bottom, right).2726 Here 2 Anywhere Instruction Manual (ver. 2)Here 2 Anywhere Instruction Manual (ver. 2)Alarm Setup ScreenStep 1—Set Alarm Time ScreenStep 2—Set Stream Screen