35OPTIONSThe following options are available for use with this transceiver:• PB-45L Li-ion battery pack• BT-15 Battery case• KSC-32 Rapid charger• SMC-32 Speaker microphone• SMC-34 Speaker microphone• EMC-3 Clip microphone withearphone• EMC-11 Clip microphone withearphone• EMC-12 Clip microphone withearphone• HMC-3 Headset• KHS-21 Headset• KHS-35F Headset• PG-3J Cigarette lighter cord• PG-2W DC cable• PS-60 DC Power SupplyNote: Optional accessories for use with this transceiver may change, post-production. (Newoptions may become available and/or current options may be discontinued.) Please refer to theoptions catalog(s) for applicable transceivers.MEMORY CONTROL PROGRAM MCP-4AThe following functions can be set only by using the MCP-4A software:• Power on password value• Bitmap setting of the Power ON graphicUsing the MCP-4A software, you can:• View memory channel groups• Save/load settings• Read exported TravelPlus for RepeatersTM fi les issued from the ARRLTM(There are some version restrictions; refer to the help text of the MCP-4A.)• Export memory and various settings in html(TravelPlus for Repeaters is a trademark of ARRL.)To download the MCP-4A software, go to:http://www.kenwood.com/i/products/info/amateur/software_download.htmlNote: This URL may change without notice.Using the MCP-4A Software1 Follow the directions of the installer to install the software.2 Set up the PC COM port.3 The transceiver data is read from the MCP-4A software.4 Select your desired settings, then write the data to the transceiver.