Kenwood TH-D7A Instruction Manual

Also see for TH-D7A: Instruction manual Sercie manual Operation manual

Contents

-band.ON (orise PTTneously.one functionr noise thatS to function, select anCTCSS FREQ. IDThis function scans through all CTCSS frequencies toidentify the incoming CTCSS frequency on a receivedsignal. You may find it useful when you cannot recall theCTCSS frequency that the other persons in your groupare using.1 Press [F], [4] (1 s) to activate the function.• The CTCSS function is switched ON.• If you access “F–4 (CTCSS FREQ)” using [UP]/ [DWN]in Function Select mode, press [OK] (1 s) to activate thefunction.• To reverse scan direction, press [UP] (upward scan) or[DWN] (downward scan).• To quit the function, press [ESC].• When the CTCSS frequency is identified, the identifiedfrequency appears and blinks.2 Press [OK] to program the identified frequency inplace of the currently set CTCSS frequency.• The previous frequency display is restored with theCTCSS function remained ON.• Press [ESC] if you do not want to program the identifiedfrequency.• Press [UP]/ [DWN] while the identified frequency isblinking, to resume scanning.Note: Received signals are audible while scanning is in progress.STA CON PACKET 96 BCONDUP97598.12.4, 0:12 PM