Kenwood TH-D7A Instruction Manual

Also see for TH-D7A: Instruction manual Sercie manual Operation manual

Contents

beter, whichaor highaaa “wide”eaterthan aing aibed ondit a paths. Themoneater.1 Press [MENU] to enter Menu mode.2 Press [2], [8] to select “2–8 (PACKET PATH)”.• The display for entering characters appears; the firstdigit blinks.3 Press [UP]/ [DWN] to select a character.• You can enter 0 to 9, A to Z, , (comma), and –.4 Press [OK].• The cursor moves to the next digit.5 Repeat steps 3 and 4 to enter up to 32 digits.• Pressing [OK] after selecting the 32nd digit completesthe programming.• To complete programming after entering less than 32digits, press [OK] twice.• Each press of [ESC] causes the cursor to movebackward.• Pressing [A/B] deletes the digit at which the cursor isblinking.6 Press [MENU] to exit Menu mode.You can also use the keypad to enter alphanumericcharacters in step 3. For example, each press of [TNC]switches entry as A, B, C, then 2. Press [ENT] to switchbetween , and –.peypeSTA CON 96 BCONDUP97598.12.4, 0:13 PM