Kenwood TH-K40A Instruction Manual

Also see for TH-K40A: Manual Service manual

Contents

20STORING ODD-SPLIT REPEATER FREQUENCIESSome repeaters use a receive/transmit frequency pair with a non-standard offset.If you store two separate frequencies in a memory channel, you can operate onthose repeaters without programming the offset frequency and direction.1 Store the desired receiving frequency and related data by following theprocedure given for simplex or standard repeater frequencies.2 Press [VFO], then rotate the ENC control to select the desired transmitfrequency.• You can also directly enter a desired frequency using the keypad.3 Press [F] - [MR], then rotate the ENC control to select the memory channelyou programmed in step 1.4 Press [PTT] + [MR].• The transmit frequency is stored in the memory channel.Note: When you recall an odd-split memory channel, “ ” and “ ” appear on the display.To confirm the transmit frequency, press [REV] (Reverse function).RECALLING A MEMORY CHANNELUSING THE ENC CONTROL1 Press [MR] to enter Memory Recall Mode. The memory channel last used isrecalled.2 Rotate the ENC control to select your desired memory channel.• You cannot recall an empty memory channel.• To restore VFO Mode, press [VFO].USING A NUMERIC KEYPADYou can also recall a memory channel by entering a desired memory channelnumber with the keypad.1 Press [MR] to enter Memory Recall Mode.2 Press [ENT], then enter the channel number.• For example, to recall channel 149, press [ENT], [MENU] (1), [SQL] (4), [PF] (9).• You can also enter a memory channel number that is less than 10 by pressing[ENT] after entering the channel number. For example, to recall memory channel9, press [ENT], [PF] (9), [ENT]. You can also press [ENT], [STEP] (0), [PF] (9).