Kenwood TH-K40A Instruction Manual

Also see for TH-K40A: Manual Service manual

Contents

48APO (AUTO POWER OFF)The transceiver switches OFF automatically if no keys or controls are pressed oradjusted for 30 minutes (default). One minute before the transceiver switchesOFF, warning beeps sound for a few seconds and “APO” blinks. You can selectthe APO time from OFF (disable), 30 (default), 60, 90, 120, or 180 minutes.1 Enter Menu mode and access Menu No. 5 (APO), then press [F].2 Rotate the ENC control to select OFF/ 30/ 60/ 90/ 120/ 180 minutes, thenpress [F] to store the setting.3 Press [MENU] or [PTT] to exit Menu mode.Note:◆ APO does not function while the transceiver is scanning.◆ When Tone Alert is ON, APO does not turn the power OFF.◆ The APO timer starts counting down the time when no keys are pressed and no controlsare adjusted.◆ The APO warning beep sounds and “APO” appears 1 minute before the transceiver turnsOFF.NARROW BAND FM OPERATIONThe transceiver operates in normal FM deviation (±5 kHz) mode for bothtransmitting and receiving. You can also operate the transceiver in narrow bandFM deviation (±2.5 kHz) mode.1 Enter Menu mode and access Menu No. 9 (N.FM), then press [F].2 Rotate the ENC control to select “ON”, then press [F] to store the setting.3 Press [MENU] or [PTT] to exit Menu mode.• When FM narrow is activated, the “ ” icon appear on the display.