Kenwood TK-2170 Instruction Manual

Also see for TK-2170 SERIES: Service manual Function reference Instruction manual Specifications Service manual

31CONNECT / D ISCONNECT ID S1 Press the # key or the key programmed as Autodial.• The first entry in the Autodial list appears.2 Connect ID: Press the key two times.Disconnect ID: Press the key followed by the # key.3 Press the PTT switch to make the call or the Side 2 key topage the selected recipient.DTMF SIGNALINGDTMF Signaling is either enabled or disabled by your dealer.This function opens the squelch only when the transceiverreceives the DTMF code programmed in your transceiver.You will not hear calls from transceivers that are notprogrammed with a matching code. (Each transceiver isnormally programmed with a unique code.)When you receive a signal containing the correct tones,squelch opens and you will hear the call.• The indicator appears.• The LED indicator flashes orange.• To mute the speaker after squelch opens, press the keyprogrammed as Monitor.• Your dealer can program the squelch to close again after aspecific time period elapses.• If Transpond for DTMF Signaling is programmed, anacknowledgment signal is returned to the calling station.• If Tone Alert for DTMF Signaling is programmed, an alert tone willsound when the correct tones are received.STUNThis function is used when a transceiver is stolen or lost.When the transceiver receives a call containing a stun code,either transmit mode will be disabled, or both receive modeand transmit mode will be disabled. Stun is cancelled whenthe transceiver receives a call with a revive code.