Kenwood TK-2180 Service Manual

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Pricing and specification manual

TK-218064. How to Attach the VGS-11) Remove the 2 screws.2) The tip of tweezers is put into the screw hole of the coverand is pried, the cover will remove.3) Use the 2 rubber cushions and attach them to the VGS-1.4) Plug the VGS-1 into the VGS-1 connector of the PC board,pressing down on the top of the VGS-1 until secure.5) The spacer turns the adhesive surface down. Next, pushbetween the chassis and VGS-1.6) Replace the cover and tighten the 2 screws.Rubber cushion(G13-1995-04)20 x 30 x 1.0 mmRubber cushion(G13-1974-04)21 x 21 x 2.5 mmVGS-1Spacer(J30-1292-04)4.5 x 24 x 3.0 mmVGS-1VGS-1 connectorDISASSEMBLY FOR REPAIR2. How to Stick the Sheet (G11-4326-04)1) Remove the white separation paper of the sheet first (q)and stick the sheet on the front-glass (w).Next, remove the transparent separation paper of thesheet (e).3. How to Attach the TX-RX Unit1) In order to attach the TX-RX unit in chassis, don’t put in theTX-RX unit aslant.Please level the chassis and the TX-RX unit and attachthem.Sheet (G11-4326-04)Front-glassqwe