Kenwood TK-2317 Instruction Manual

Also see for TK-2317: Service manual Specification Instruction manual Service manual

3SCANScan monitors for signals on the transceiver channels. Whilescanning, the transceiver checks for a signal on each channeland only stops if a matching signal is present.To start/stop scanning, press the key programmed as [Scan].• The indicator appears during Scan.• When a signal is detected, Scan pauses at that channel. Thetransceiver will remain on the busy channel until the signal is nolonger present, at which time Scan resumes.Note: To use Scan, there must be at least 2 channels added to thescanning sequence.PrIorITy SCANIf a Priority channel has been programmed, the transceiverwill automatically change to the Priority channel when a callis received on that channel, even if call is being received on anormal channel.• The indicator appears when the selected channel is the Prioritychannel (depending on dealer setting).TEMPorAry CHANNEl loCKoUTDuring scan, you can temporarily remove specific channelsfrom the scanning sequence by momentarily pressing the keyprogrammed as [Scan Delete/Add] while Scan is paused atthe undesired channel. To temporarily remove a zone, pressand hold the [Scan Delete/Add] key while Scan is paused at achannel in the undesired zone.• The channel/zone is no longer scanned. However, when scanningis ended and restarted, the Scan settings return to normal.