v• Use only the specified charger and observe chargingrequirements!If the battery s charged n unspecfed condtons (under hghtemperature over the regulated value, excessve hgh voltage orcurrent over regulated value, or wth a remodeled charger), t mayovercharge or an abnormal chemcal reacton may occur. Thebattery may generate heat or smoke, rupture, or burst nto flame.• Do not pierce the battery with any object, strike it with aninstrument, or step on it!Ths may break or deform the battery, causng a short-crcut. Thebattery may generate heat or smoke, rupture, or burst nto flame.• Do not jar or throw the battery!An mpact may cause the battery to leak, generate heat or smoke,rupture, and/or burst nto flame. If the battery’s protecton crcuts damaged, the battery may charge at an abnormal current (orvoltage), and an abnormal chemcal reacton may occur. Thebattery may generate heat or smoke, rupture, or burst nto flame.• Do not use the battery pack if it is damaged in any way!The battery may generate heat or smoke, rupture, or burst ntoflame.• Do not solder directly onto the battery!If the nsulator s melted or the gas release vent or safety functons damaged, the battery may generate heat or smoke, rupture, orburst nto flame.• Do not reverse the battery polarity (and terminals)!When chargng a reversed battery, an abnormal chemcal reactonmay occur. In some cases, an unexpected large amount of currentmay flow upon dschargng. The battery may generate heat orsmoke, rupture, or burst nto flame.• Do not reverse-charge or reverse-connect the battery!The battery pack has postve and negatve poles. If the batterypack does not smoothly connect wth a charger or operatngequpment, do not force t; check the polarty of the battery. If thebattery pack s reverse-connected to the charger, t wll be reverse-charged and an abnormal chemcal reacton may occur. Thebattery may generate heat or smoke, rupture, or burst nto flame.