Kenwood TK-260G Service Manual

Also see for TK-260G: Instruction manual Instruction manual Service manual Service manual Service manual

Contents

TK-260G/270G16DISASSEMBLY FOR REPAIRSeparating the case assembly from the chassis.1. Remove the two knobs z and three round units x.2. Remove the two screws c.3. Expand the right and left sides of the bottom of the caseassembly, lift the chassis, and remove it from the caseassembly v.4. Taking cure not to cut the speaker lead b, open the chassisand case assembly, and pull the speaker lead withconnector n.Separating the chassis from the unit.• TK-260G1. Remove the twelve small screws m, and the three largescrews ,.2. Remove the solder from the antenna terminal using asoldering iron, then lift the unit off (X57).• TK-270G1. Remove the three screws ..Lift the unit (X54), and rise up the connecter lever in thearrow with your finger /.Remove the three hexagonal bosses-, and remove thetwelve screws m.2. Remove the solder from the antenna terminal using asoldering iron, then lift the unit off (X57).TK-270GTK-260Gstopper·¹¸¶¸· ¶· ¶·CN3bnTK-270GAntenna teminalX54-X57-X57-¾ ¿Ð½¾¾½½ÐÐÐÐ ÐÐÐÐÐÐÐΩΩΩ11