Kenwood TK-5310 K4 Service Manual

Also see for TK-5310: Specifications Instruction manual Specifications Instruction manual

Contents

TK-53107Item Zone-Channel RX Frequency TX Frequency Channel Type TX Mode Channel Spacing RX Signaling TX SignalingKey[A] Go to the next item[B] Zone/Channel 5kHz/6.25kHz/1MHz Unused QT/DQT(N)/DQT(I)/OFFswitching step switching switching[C] Zone/Channel 1 step down ANALOG/P25/MIXED ANALOG/P25 Channel spacing Signaling downdown switching(Back) switching(Back) switching(Back)[D] Zone/Channel 1 step up ANALOG/P25/MIXED ANALOG/P25 Channel spacing Signaling upup switching(Forward) switching(Forward) switching(Forward)[Side3] Data Unused ON/OFF Unused 1 step/Standardwriting switching switchingKeypad[0]~[9] Unused Go to the direct enter mode Unused Go to the direct enter mode(K3 and K6 (After selecting signaling type)models only)Key operationItem RX NAC TX NAC TG List No.Key[A] Go to the next item[B] Delete the least digit from the current number Unused(Press and hold to delete all numbers.)[C] Unused TG Listnumber down[D] Determine the least digit TG Listnumber up[Side2] Increment a number in the specified digit Unused[Side3] Decrement a number in the specified digit UnusedKeypad Add a digit to the current number(K3 and K6 How to enter the “A” ~ “F” is follows. Unusedmodels only) A : Press [2] with PTT B : Press [5] with PTT C : Press [8] with PTTD : Press [0] with PTT E : Press [#] with PTT F : Press [*] with PTTREALIGNMENT• Direct enter modeItem RX Frequency TX Frequency RX Signaling TX SignalingKey[A] Return to non-direct enter mode[B] Unused Change the type of signaling andreturn to non-direct enter mode[C] Unused[D] Delete the least digit from the current number(Press and hold to delete all numbers.)[Side3] ON/OFF switching at TX Frequency UnusedKeypad Add a digit to the current number[0] ~ [9]Keypad Return to non-direct enter mode[*]Keypad Delete the least digit from the current number[#] (Press and hold to delete all numbers.)