Kenwood TK-5400 Series Service Manual

Contents

29TK-5400ADJUSTMENT• Key FunctionControls Operation[Selector] Used to select a test channel.[PTT] Used to switch between transmission andreception.[Top 1] Used for signaling down.[Top 2] Used for signaling up.[Side 1] Change filter mode.When this key is held down for longer thanone second, panel adjustment mode isactivated.[Side 2] Switch between low and high power fortransmission.When this key is held down for longer thanone second, the LCD and all LEDs turn on.[Orange] Turns squelch off in analog mode.Does not work in APCO mode.[Toggle Switch] Switch between talk around andsemi-duplex mode.• Filter ModeDisplay ConditionAP APCO (12.5kHz) FilterWD WIDE (25kHz) FilterNP NPSPAC (20kHz) FilterNW NARROW (12.5kHz) Filter• Test FrequencyTest Channel RX Frequency TX Frequency1 851.0500 806.05002 851.5500 806.55003 860.0000 815.00004 860.5000 815.50005 865.9875 820.98756 869.4000 824.40007 869.9000 824.90008 855.4000 810.40009 865.6000 820.600010 856.4000 811.400011~16 Not Used Not Used• Test SignallingNo. RX Signalling TX Signalling APCO/Analog1 None None Analog2 None 100Hz Square wave Analog3 QT 67.0Hz QT 67.0Hz Analog4 QT 151.4Hz QT 151.4Hz Analog5 QT 210.7Hz QT 210.7Hz Analog6 QT 254.1Hz QT 254.1Hz Analog7 DQT 023N DQT 023N Analog8 DQT 445N DQT 445N Analog9 DQT 754I DQT 754I Analog10 None DTMF Code “9” Analog11 None DTMF Single Tone 1633Hz Analog12 NAC 293 NAC 293 APCO13 NAC 023 NAC 023 APCO14 NAC 5EA NAC 5EA APCO15 1011Hz Tone Test Pattern 1011Hz Tone Test Pattern APCO16 None Silence Pattern APCO17 None Calibration Pattern APCO18 None Transmitter Test Pattern APCO19 None Symbol Rate Pattern APCO20 None Low Deviation Pattern APCO21 None Fidelity Pattern APCO2. Panel TuningVarious adjustments are made with transceiver keys inthis mode.1. When the [Side 1] key is held down for longer than onesecond, the panel adjustment mode is activated.2. When the [Side 1] key is held down for longer than onesecond during panel adjustment, the panel adjustmentmode is terminated and the panel test mode returns.• Key FunctionControls Operation[Selector] (Unused)[PTT] Transmission. When the battery low voltageis adjusted, the adjustment value is displayedon the LCD.[Top 1] Functions as a down key.[Top 2] Functions as an up key.[Side 1] Leaves the panel adjustment mode andreturns to the panel test mode.[Side 2] Places setting data into memory and movesto the next item.[Orange] Changes mode if there is an adjustment itemfor correction.Used to write data into memory when SQL,RSSL or battery low voltage is adjusted.[Toggle Switch] (Unused)