3TK-5400SYSTEM SET-UP / OPERATING FEATURESMerchandise receivedLicense and frequency allocated by FCCChoose the type of transceiverTransceiver programmingAre you using the optional antenna?DeliveryAre you using the speaker microphone?Model type TK-5400 KTK-5400 K2No keypadWith keypadA personal computer (IBM PC or compatible), programminginterface (KPG-36), and programming software (KPG-78D)are required for programming.(The frequency, signalling data and features are programmedfor the transceiver.)YESYESNONOKRA-24Whip antenna(Option)KMC-25OPERATING FEATURES1. Getting Acquainted 1-1. Key Descriptionsq Transmit/Busy/Battery low indicatorLights red while transmitting. Lights green while receiv-ing. Flashes red when the battery power is low whiletransmitting. Replace or recharge the battery pack whenthe battery is low.Note : This indicator can be disabled by your dealer.w Power switch/Volume controlTurn clockwise to switch ON the transceiver. Rotate toadjust the volume. Turn counterclockwise fully to switchOFF the transceiver.e Rotary encoderRotate this encoder to activate its programmable function(page 4).r Antenna connectorConnect an (optional KRA-24) antenna to this SMA maletype antenna connector.t Toggle switchSwitch the toggle position to activate its programmablefunction (page 4).y DisplayRefer to the display on page 4.u Top 1 keyPress to activate its auxiliary function (page 4).i Top 2 keyPress to activate its auxiliary function (page 4).o Battery pack release latchPull back on this latch to release the battery pack.A BMicrophone Speaker